To reduce the risk of system failure, is it mandatory to have line redundant composition? Please ...
[JPX]In order to reduce the risks of AP failure, redundant configuration connecting to either AP2, AP3, or AP4 is recommended.Multicast transmission is not r... Show Details
What is the required bandwidth (maximum bandwidth) for multicast service such as FLEX/J-GATE (ITCH)?
The bandwidth required for each multicast service is as follows.FLEX Standard: 100MbpsFLEX Full: 100MbpsFLEX Standard High Speed Index: 120Mbps* After update... Show Details
What is the network latency from AP3 (CC1/CC2) to JPX Systems?
Approximate measurement value is as followings. - 1Gbps: 58 microseconds (CC1) / 56 microseconds (CC2) - 10Gbps: 57 microseconds (CC1) / 55 microseconds ... Show Details
What type of router/L3SW should be equipped? Please tell us about each SP (JPX, JASDEC and TFX). ...
In arrownet v2, VLAN tags must be set up to identify the connecting VPN. When using a router/L3SW with no feature of VLAN tags, a L2SW that can attach VLAN t... Show Details
Tell me the configuration information to use Compliance WAN via arrownet line.
Configuration information of Compliance WAN is as below, -Compliance WAN User Administrative site URL: https://cmp.target.ne.jp/mgr/index.do Destina... Show Details
Is there also any recommended router or L3SW about other Service Provider (SP) just like JASDEC?
JASDEC allows only a compatible device to connect, but TSE does not recommend any specific router or L3SW about other SP.For further information about a comp... Show Details
Where is the location of each access point (AP) of arrownet?
Each access point (AP) is located as below.AP2 : SaitamaAP3 : ToyosuAP4 : Osaka Show Details
Is it possible to have a Redundant Configuration with 3 locations which is AP2-AP3-AP4 (3 lines)?...
Only JPX SP is available.For the detail of composition, please refer to "arrownet v2 Guideline for NW Connection (Common)".As for the redundant methods (sele... Show Details
Does JPX provide users with router/L3SW other than ONU?
JPX provides neither router nor L3SW.Users need to prepare the network devices on the user-side up to the ONU. Show Details
Is the redundant configuration in same AP supported? Please tell us about each SP (JPX, JASDEC, a...
Please contact us for more info about the recommended configuration.For more technical information (e.g. selectable AP), please refer to "arrownet version2.0... Show Details
1-10 of Total 16