• No : 922
  • Updated Date : 2024/03/24 09:00
  • Print

[Screen Help] Quote Request/Application for New/Change of arrownet Line

[Screen Help] Quote Request/Application for New/Change of arrownet Line
Category : 

Answer

【Quote】
 
1: Quote No.
Enter the Quote Request Application ID (Quote No.), when you want to make a quote request using the quote conditions you set in the past.
 
2: Copy the Quote Options
After entering the Quote Request Application ID (Quote No.), click the [Copy the Quote Options] button.
The quote conditions that were set in the Quote Request Application ID you entered will automatically be filled in.
 
3: Desired Start Date
Click Calendar button, and select the desired start/change date.
You can also enter the date directly in yyyy/mm/dd format.
It will take about 1.5 months (*around 3.5 months for 1G line, around 4-5 months for 10G line and a month for Cloud Connection) to deliver the line after submitting application (After the Quote Request has been approved and the application has been submitted).
It will take about 1.5 months for AT TOKYO's Cross-Connection Service to deliver the line from our application approval (Same for all bandwidths).
Please note that the lead time for arrownet connection is the period from the date of application approval to the delivery date (NOT from the date of quote request application submission/application submission).
*If there will be any insufficient contents on application, the delivery time will be longer than normal.
*If you require the earliest delivery date for a new line, please select the Sunday after the housing date (the first and third Saturday of the month) that satisfies the lead time as your desired date.
*If you require a change with the earliest delivery date, please select the first or third Saturday of each month (the housing date) that satisfies the lead time as your desired date.
 
4: Access Point
Select the access point to connect.
*It is impossible to select "AP1" anew.
*It is a mandatory item to select unless the line type is arrownet v2 IB.
*Change of APs is not allowed in principle. Possibly available with some restrictions. Please contact the JPX Service Desk (Application Procedure) in advance (in some cases, this AP change is not possible).
Restrictions ... The change is only available on the first and third Saturdays of each month, cannot be switched back.
AP2 : Chuo-ku, Saitama city, Saitama, NTT East Saitama Shintoshin Building (Saitama Media Wave)
AP3 : Toyosu, Koto-ku, Tokyo, @Tokyo Chuo Center (CC1) and Chuo Center 2 (CC2)
AP4 : Nishi-ku, Osaka city, Osaka, Keihanshin Nishi-Shinsaibashi Building.
 
5: Carrier
Select the carrier of the quote request.
*Selectable carriers: NCOM, KDDI, Colt, SB, ATTOKYO, arrownet (v2 IB Connection, Kansai Proximity Internal Connection) (NTTE is not selectable).
*In case of the Cloud Connection, please select one that shows SP environment which is connected through the cloud carrier "AWS".
*For information on each carrier's service and latency (reference values), please refer to the sales paper published by the carrier (Download from the System Documents Site).
 
6: Bandwidth
Select the bandwidth of the quote request.
Please select from this bandwidth: 512k, 1M, 2M, 5M, 10M, 100M, 1G, 10G
The fee depends on the bandwidth. Refer to (1) arrownet Basic Fee (arrownet Line) listed in "arrownet version 2.0 Connection Service and Price List".
 
7: Circuit Type
Select the circuit type of the quote request.
*Only available types can be selected.
Please refer to (1) arrownet Basic Fee (arrownet Line) in "arrownet version 2.0 Connection Service and Price List" for the line service name.
Widearea Ethernet and Dedicated Ether Line can be combined for redundant configuration.
Please refer to "7.1 Carrier" on "arrownet v2 Guideline for NW Connection (Common)" and the Carrier Sales Paper for descriptions of Widearea Ethernet, Dedicated Ether Line, P to P, etc.
Widearea Ethernet service does not allow multicast transmission.
Business System that uses multicast transmission: FLEX, ITCH, part of TFX (For details on TFX services, please contact TFX office.)
[Tokyo Financial Exchange (TFX)]
-Systems for Margin Contracts <click_sys@tfx.co.jp>
-Systems for Interest Rate futures contracts <kinri@tfx.co.jp>
*Cross-Connection Express Service can be selected when applying for a JPX Co-Location External Connection Line (Cross-Connection/AP3).
Please select "Cross-Connection Service (CC1) Express" or "Cross-Connection Service (CC2) Express". Other items are the same as when applying for a regular JPX Co-Location External Connection.
Please contact the JPX Service Desk (application procedure) in order to arrange the schedule for your application.
 
8: Postal Code
Enter the postal code of the location of the termination point.
*It is mandatory item to enter unless the line type is arrownet v2 IB and Cloud Connection.
 
9: Prefecture
Enter the prefecture of the location of the termination point.
*It is mandatory item to select unless the line type is arrownet v2 IB and Cloud Connection.
 
10: City
Enter the city of the location of the termination point.
*It is mandatory item to enter unless the line type is arrownet v2 IB and Cloud Connection.
e.g.) Kayabacho Nihonbashi Chuo-ku
 
11: Address
Enter the address of the location of the termination point.
*It is mandatory item to enter unless the line type is arrownet v2 IB and Cloud Connection.
e.g.) 7-1-70
 
12: Building Name
Enter the building name of the location of the termination point.
 
13: Floor
Enter the floor number of the location of the termination point.
 
14: Room No.
Enter the room number of the location of the termination point optionally.
 
15: Rack ID
Enter the rack ID of the termination point optionally.
 
16: Construction Division
Select the construction division of the location of the line termination point.
-Up to the point of MDF: Carrier construction liability covers up to MDF
-Up to the point of MDF jumper: Carrier construction liability covers up to MDF jumper
-Up to the point of IDF: Carrier construction liability covers up to IDF (If the user-occupied building has a designated construction contractor)
-Up to the point of DSU/ONU: Carrier construction liability covers up to just before the terminal (If the user-occupied building has not a designated construction contractor)
*It is mandatory item to select unless the line type is arrownet v2 IB and Cloud Connection.
*If the construction division category is unknown when the quote request is submitted, please select "Up to the point of DSU/ONU". Please note that the estimated cost covers up to the location of the ONU.
Users are advised to confirm the installation and provision method at the termination point as they may differ depending on each data center and building (Provided by patch panel or cable, not by ONU).
*Please refer to the last page of arrownet version 2.0 Connection Service and Price List" for the negotiation setting of user's site (user's router) in arrownet v2 and AP3 Co-Location external connection line.
*Please refer to "arrownet version2.0 Guideline for Network Connection (JPX)" 7.2.6 Connection Interface Specifications for the interface information of the Co-Location internal connection line (v2 IB).
 
17: Usage of Jumbo Frame
Tick for using the jumbo frame (Selectable only for Co-Location External Connection v2 lines 1G and 10G, not selectable for AP3 Co-Location external connection line).
 
18: JPX Colo Connection Rack ID
19: JPX Colo Connection Port No.
When change quote, it will be possible to choose.
It chooses when move Rack and Port.
 
 
Please select and enter SP line information on the following screen.
Routers/L3 switches are assigned VLAN tags, if you are using a router/L3 switch that cannot be assigned a VLAN tag, please configure the L2 switch so that it can be assigned a VLAN tag.
If you require to connect multiple service provider (hereinafter referred to as "SP") connections, please use the following methods, etc.
-Prepare routers/L3 switches for the number of SPs to be connected, and aggregate them with L2 switches.
-Use a router/L3 switch with VRF functionality to logically separate settings. (Some SP connections cannot be shared with other SPs.)
Please refer to "arrownet version2.0 Guideline for Network Connection" for details.
-We do not recommend, specify, or provide network equipment such as routers and L3 switches.
 
 
20: System to use
Tick the business systems to use on the line for the Production and test environment each.
*Pease contact the JPX Service Desk (application procedure), when you wish to use CONNEQTOR (arrowhead4.0).
 
OK:Available △:Limited to Receipt of Market info.
 
*1: Information Systems: Target / Compliance WAN / TMI / Derivative Trading Report by Type of Investors System / TDnet
*2: The following systems are unavailable in the test environment.
- FLEX Standard(WB), FLEX Standard High Speed Index, FLEX Full(WB), FLEX Market by Order
- Target, Compliance WAN, TDnet, TMI, Derivative Trading Report by Type of Investors System
- JGBC
*3: The following systems are unavailable in the Cloud Connection.
- FLEX Standard, FLEX Standard(WB), FLEX Standard High Speed Index, FLEX Full, FLEX Full(WB), FLEX Market by Order, FLEX Market by Order BC
- J-GATE(ITCH)
 
≪Required bandwidth of each multicast service≫
*4: Please check the specifications and calculate the bandwidth required in the data to be received. In addition, the minimum required bandwidth is 69.3Mbps.
*5: For the Production environment, a line bandwidth of 1Gbps or higher is required to use both FLEX Standard and FLEX Full.
For Test environment, both FLEX Standard and FLEX Full can be used with 100Mbps lines. (However, since there is a possibility of packet loss, it is necessary to state in the "Special Note" of the application form that you understand the possibility of packet loss.)
*6: For Production environment, FLEX Market by Order (arrowhead4.0), 10Gbps bandwidth is required.
*7: The total bandwidth required for the FLEX service (arrowhead4.0) in the Test environment will be less than 100Mbps for use of FLEX Standard and FLEX Market by Order BC combined.
 
21: JPX Usage Type
By clicking on this [JPX Usage Type], the usage type is automatically entered based on the usage system selected in the JPX and JPX Information System SP.
 
22: JPX Usage Type
Usage Type is a field that must be set when submitting a Quote Request for New/Change of arrownet Line (Physical/Logical).
If Type A is automatically selected when only market information is used, you must manually change the type (select Type I).
To use both JPX and JPX Information System SP, click the [Usage Type] button after selecting usage systems on JPX and JPX Information System, and the usage type will be automatically entered.
The usage type is determined by the business system to be used, and the arrownet monthly usage fee (logical line) is determined by the usage type.
Please note that monthly fees differ significantly between Type "A" (All) and Type "I" (Information).
 
23: JPX the Bandwidth Control
Bandwidth for both upstream and downstream will be restricted to the value selected in Maximum Bandwidth.
When using the bandwidth control with JPX SP, tick for Production and Test each.
Bandwidth control service (whole SP line) is generally not available if there is multicast transmission on Test L3VPN. For use of the service, please contact the JPX Service Desk (Application Procedure) with the understanding that there is a risk of packet loss.
For JPX bandwidth control, a separate Bandwidth Control Fee of JPY 8,000/month (excluding tax) will be charged.
 
24: JPX Bandwidth Control Type
When Test is ticked in the JPX - Bandwidth Control, select whether to set the bandwidth control on specific business systems or on the whole SP line.
Only "Specific" is available for the Production environment.
When "Specific" is selected for Bandwidth Control, please select one business system only for each of the Production and Test in "36: Bandwidth Control [Specific Control]". (Multiple selections not allowed)
 
25: JPX Information the Bandwidth
Select the bandwidth for Production and Test each of JPX Information SP.
When using the JPX Information, input is a must and no bandwidth control fee will be charged.
It can be selected arbitrarily within the bandwidth selected in "6: Bandwidth".
 
 
26: JASDEC (Transfer and Settlement) Usage Type
By clicking on this [Usage Type], the usage type is automatically entered based on the usage system selected in the JASDEC (Transfer and Settlement) SP.
 
27: JASDEC (Transfer and Settlement) Usage Type
Select the usage type after clicking [Usage Type] button when selecting the systems of JASDEC (Transfer and Settlement) SP.
 
28: JASDEC (Transfer and Settlement) the Bandwidth
Select the bandwidth for Production and Test each of JASDEC (Transfer and Settlement) SP.
The fee depends on the bandwidth. Refer to JASDEC (Type H (Transfer and Settlement)) in (2) arrownet Usage Fee (SP Line) listed in "arrownet version 2.0 Connection Service and Price List".
It can be selected arbitrarily within the bandwidth selected in "6: Bandwidth".
 
29: JASDEC (Shareholder Information) Usage Type
By clicking on this [Usage Type], the usage type is automatically entered based on the usage system selected in the JASDEC (Shareholder Information) SP.
 
30: JASDEC (Shareholder Information) Usage Type
Select the usage type after clicking [Usage Type] button when selecting the systems of JASDEC (Shareholder Information) SP.
 
31: JASDEC (Shareholder Information) the Bandwidth
Select the bandwidth for Production and Test each of JASDEC (Shareholder Information) SP.
The fee depends on the bandwidth. Refer to JASDEC (Type HH (Shareholder Information)) in (2) arrownet Usage Fee (SP Line) listed in "arrownet version 2.0 Connection Service and Price List".
It can be selected arbitrarily within the bandwidth selected in "6: Bandwidth".
*The application acceptance for the bandwidth range of 2-20Mbps is scheduled to start around August 2024.
 
 
32: TFX Usage Type
By clicking on this [Usage Type], the usage type is automatically entered based on the usage system selected in the TFX SP.
 
33: TFX Usage Type
Select the usage type after clicking [Usage Type] button when selecting the systems of TFX SP.
 
34: TFX the Bandwidth
Select the bandwidth for Production and Test each of TFX SP.
The fee depends on the bandwidth. Refer to TFX (Type F/FH (TFX All/Limited)) in (2) arrownet Usage Fee (SP Line) list in "arrownet version 2.0 Connection Service and Price List".
It can be selected arbitrarily within the bandwidth selected in "6: Bandwidth".
*As a rule, only the upstream feed will be controlled at a limit of the selected bandwidth.
 
 
35: Only for JPX User LAN Add/Removal
Check this box to add or delete User LANs for JPX and JPX Information SP.
*When checked, line ID will be listed in "Special Note" at the bottom of the quote request screen. Leave the SP line ID to add or delete LAN, and delete unnecessary SP line ID.
Please also write the existing number of User LANs and how many User LANs you to add. If you prefer to use the User LAN segments solely with one business system, please state so with the business system name.
*If you add a User LAN (/24) address with Dedicated for 1 business system, only one business system can be selected.
*Up to 20 User LANs (/24) can be allocated per JPX line.
*Please refer to "arrownet version2.0 Guideline for Network Connection (JPX)" 6.3 Use of IP Addresses for User LAN segments.
*Please contact the Japan Securities Depository Center (JASDEC) for the LAN of the JASDEC line.
*There is no Setting Change Fee for adding or deleting User LAN segments only.
 
36: Bandwidth Control [Specific Control]
If you selected Bandwidth Control "Specific" in "24: JPX Bandwidth Control Type", select one check box for each of the Production and Test for bandwidth control. (Multiple selections not allowed)
Bandwidth control cannot be applied individually to multicast transmission such as FLEX and ITCH.
 
37: External Connection Line Bandwidth for Bandwidth Control
Selectable for Co-Location use. Select the desired bandwidth.
 
38: Create the quote request form
Create the request form and confirm the entered information by clicking the button.
*Please refer to "arrownet version 2.0 Connection Service and Price List" for arrownet's one-time and monthly fees.
*Project ID field is available on the application screen after the form is created (Optional entry field, max. 50 characters).
*If there are supplementary notes of quote request, please input "Special Note" at the bottom of quote request screen.
*Carrier may contact the Issuer (which is shown at the top of the screen of [Quote Request for New (Change of) arrownet Line (Physical/Logical)]).
If the point of contact is not the Issuer, please input the contact information of the person in charge (name, phone number, e-mail address) in the "Special Note" section at the bottom of the quote request screen.
If you can't put the information on "Special Note" due to exceeding the number of characters, etc., please send e-mail to JPX Service Desk (application procedure) <servicedesk@jpx.co.jp> with Application ID and contacts (name, phone, e-mail).
 
 
【application】
*When applying for a line, the information entered for the quote request is carried over.
 
1: Desired Date
Select the desired start/change date from the calendar.
You can also enter the date directly in yyyy/mm/dd format.
It will take about 1.5 months (*around 3.5 months for 1G line, around 4-5 months for 10G line and a month for Cloud Connection) to deliver the line after submitting application (After the Quote Request application has been approved and the application has been submitted).
Please make sure to check the lead time on the quote request application as the lead time varies depending on the area, distance range, carrier and access point.
*If there will be any insufficient contents on application, the delivery time will be more than normal.
 
 
2: Line Composition
Select the line configuration for each service provider (SP) for which you are applying.
-JPX, JPX Information SP
*Select Single (single static routing), Redundancy, or Triple Redundancy (dynamic routing BGP).
*In case of change or cancellation of redundant configuration lines, application for change or cancellation of redundant paired lines is also required.
*A redundant configuration connecting to each of AP2, AP3, and AP4 is recommended.
*Multicast transmission is not redundant (not rerouted in case of failure) as a network. It is recommended to ensure reliability by using a redundant configuration (multiple configuration using two lines in the single configuration) that receives both Stream 1 and Stream 2.
*To install only one line in the single configuration, please understand that the user must bear the risk of not having a redundant configuration, and enter the following in the Special Note section of the Application for New/Change arrownet Line (Physical/Logical).
"We will install only one line at our own discretion, and we accept responsibility for any risk incurred by failing to install two lines."
*"Triple Redundancy" can be selected only for JPX and JPX Information SPs ("Triple Redundancy" has operational limitations, so please consult with JPX Service Desk (application procedure) before applying).
*Redundant Configuration 2-line with single AP (AP3 redundancy, AP4 redundancy) can only be selected if you have a contract for a line connected to a different access point as an alternative in the failure of this access point.
 
-Japan Securities Depository Center (JASDEC) SP
*Redundant configuration connecting to two locations of AP2, AP3, or AP4 is required. Single configuration can be selected only for the line connecting from users' backup site. No restrictions are placed on Test environment connections.
 
-Tokyo Financial Exchange (TFX) SP
*Redundant configuration connecting to two locations of AP2, AP3, or AP4 is recommended. It is recommended to ensure reliability by using a redundant configuration (multiple configuration using two lines in the single configuration) that receives both Stream 1 and Stream 2. TFX's Margin Contracts system must be configured for redundancy.
 
3: Wish to conduct NW Test
Select whether to conduct the network reachability test for each SP.
Even if you select "No", when installing a new SP line, the network test is mandatory. ("Yes" will be selected.)
 
4: Pair ID
Enter an arbitrary ID when the line composition is redundant. The ID must be the same as the one of the paired line.
Only half-width Arabic numerals and upper and lower case alphabetical characters can be entered for pair IDs. Example: pair1, pairA
 
5: JPX FLEX/ITCH Stream
When using FLEX or ITCH systems, select the FLEX/ITCH stream.
In AP2, only Stream 2 can be selected.
For the connections through AP3 and AP4, Stream 1 and Stream 2 are selectable. For AP3 redundancy and AP4 redundancy, you must apply for both streams; apply for Stream1 and Stream 2 separately.
For AP4, there are restrictions on the streams that can be selected depending on the line service. Please contact the JPX Service Desk (Application Procedure).
For the Test environment, only Multicast Stream 1 is available.
 
6: JPX Maximum Bandwidth
When using the bandwidth control with JPX SP, select the maximum bandwidth for the Production and Test environment each.
*Bandwidth for both upstream and downstream will be restricted to the value selected in Maximum Bandwidth.
 
 
7: JASDEC (Transfer and Settlement) Network Management ID
The combined 8-digit string (NWxxx-xxx) of a 5-digit alphanumeric string issued to each user by JASDEC and a 3-digit number code assigned by each user in the form "Notification for the Use of Network".
Enter the Network Management ID written in the form "NW-02:Notification for the Use of Network" to be submitted to JASDEC.
*Please send an email to JASDEC office <system-toiawase@jasdec.com> for more detail.
 
8: JASDEC (Transfer and Settlement) Usage Premises
Select the usage premises when applying for the systems of JASDEC (Transfer and Settlement) SP.
 
9: JASDEC (Shareholder Information) Network Management ID
The combined 8-digit string (NWxxx-xxx) of a 5-digit alphanumeric string issued to each user by JASDEC and a 3-digit number code assigned by each user in the form "Notification for the Use of Network".
Enter the Network Management ID written in the form "NW-02:Notification for the Use of Network" to be submitted to JASDEC.
*Please send an email to JASDEC office <system-toiawase@jasdec.com> for more detail.
 
10: JASDEC (Shareholder Information) Usage Premises
Select the usage premises when applying for the system of JASDEC (Shareholder Information) SP.
 
 
11: TFX Stream
Select the TFX connection stream (Stream 1 or Stream 2).
In AP2, only Stream 2 can be selected.
For the connections through AP3 and AP4, Stream 1 and Stream 2 are selectable. For AP3 redundancy and AP4 redundancy, you must apply for both streams.
For AP4, there are restrictions on the streams that can be selected depending on the line service. Please contact the JPX Service Desk (Application Procedure).
 
12: TFX Number of User LAN (/24) Segments
Select the number of user LAN segments for the Production and Test environment each when applying for the systems of TFX SP.
 
13: TFX User LAN Identical
Selectable when applying for the "redundant" configuration of TFX SP.
Select "Yes" for both production and test environment each when using the user LAN segments with an identical subnet.
 
 
14: Only for JPX User LAN Add/Removal
Check this box to add or delete User LANs for JPX and JPX Information SP.
*When checked, line ID will be listed in "Special Note" at the bottom of the quote request screen. Leave the SP line ID to add or delete LAN, and delete unnecessary SP line ID.
Please also write the existing number of User LANs and how many User LANs you to add. If you prefer to use the User LAN segments solely with one business system, please state so with the business system name.
*If you add a User LAN (/24) address with Dedicated for 1 business system, only one business system can be selected.
*There is no Setting Change Fee for adding or deleting User LAN segments only.
 
15: External Connection Line  Line
This item is selectable for Co-Location use. Select the desired arrownet stream.
In the case of using FLEX or ITCH on JPX SP (Production), please select the same stream as JPX (Production) FLEX/ITCH stream.
 
16: Create the application form
Please confirm the information you have entered and click the [Create the application form] button to move to the application screen.
Please note that the application is not submitted until you click the Submit button shown on the left top of the next application screen, and click the OK button on the confirmation window.
You are requested to confirm if the application is submitted on the Application Status List. If the Status of the created application says [Submitted], the application is submitted.
*Project ID field is available on the application screen after the form is created (Optional entry field, max. 50 characters).
*If there are supplementary notes of quote estimate, please input "Special Note" at the bottom of application screen.
*Carrier may contact the Issuer (which is showed at the top of the application screen).
If the point of contact is not the Issuer, please input the contact information of the person in charge (name, phone number, e-mail address) in the "Special Note" section at the bottom of the application screen.
If you can't put the information on "Special Note" due to exceeding the number of characters, etc., please send e-mail to JPX Service Desk (application procedure) <servicedesk@jpx.co.jp> with Application ID and contacts (name, phone, e-mail).